Making a powerful blower with your own hands

A lot of things that seem unnecessary to us can actually be applied on the farm. One has only to aim to embody an incredible idea, and the solution can come by itself. And the resulting creation will be remembered forever by the exciting minutes of creativity in the home workshop. And how can one not remember about cleaning, because this event sometimes negates all creative impulses. Bringing order, cleanliness around yourself and in the outside world is very important, but not always pleasant. But there is a way out, and we will show it to you today. Remove leaves from the tracks, debris from the playground or other unnecessary things - everything is possible with it! And most importantly, with such a device, any cleaning will turn into a pleasant, and certainly not a dull time forwarding.
Making a powerful blower with your own hands

Materials-tools

  • Box for CD / DVD CDs;
  • DC 12 V motor,6000 rpm;
  • Button-switch;
  • 5.5 mm plug for power supply;
  • Empty metal bottle from deodorant;
  • Liter plastic bottle (PET);
  • Plastic bottle cap;
  • PVC pipe length 25 mm;
  • Hot melt glue gun, soldering iron;
  • Paint knife, scissors, marker, ruler, and small hacksaw.

Getting Started with the Blower

First, prepare the empty disc box. She needs to dismantle the cylindrical axis. Cut it with a heated blade of a painting knife, and cram it by hand.
Making a powerful blower with your own hands
Making a powerful blower with your own hands
Making a powerful blower with your own hands
We make a powerful blower with our own hands
Take the 12 V DC engine and connect a button-switch with a power supply connector to it as shown in the photo. Fix the engine from the back Platform for discs on hot glue.Thoroughly glue the case around the entire circumference. "style =" max- width: 100%; " alt="Making a powerful blower with your own hands">
We make a powerful blower with our own hands
Making a powerful blower with your own hands The next step is to cut a liter plastic bottle (PET). Measure out 6 cm from the bottom of the bottle, and cut off a small cap with a painting knife. We don't need the rest of the bottle. "style =" max- width: 100%; " alt="We make a powerful blower with our own hands"> Then we make several holes from the bottom in this cap. They are needed for the switch and charging jack. On hot glue we fix the button-switch and the connector for the power supply from the inside of the cap. "style =" max- width: 100%; " alt="Making a powerful blower with your own hands">
Making a powerful blower with your own hands
Making a powerful blower with your own hands
We make a powerful blower with our own hands
Apply hot glue to the outer edge of the hood,and glue it onto the back of the drive platform.
Making a powerful blower with your own hands
Making a powerful blower with your own hands
From the empty metal bottle from under the deodorant we will prepare the blades of the impeller. Hacksaw for metal cut off the bottom and neck of the bottle, and cut the body along the usual scissors.