How to mount electrical wiring

Instruction
Choose wiring type
There are outdoor and indoor installation methods for wiring. It should be noted that open wiring is used, as a rule, in utility rooms and is rarely used in apartments. Hidden wiring is the most common type of wiring, in particular, because of its safety. Its disadvantages include the need for shtenbing the walls when laying and the impossibility of attaching new current collectors without disturbing the integrity of the wall covering.
Make a wiring plan
Indicate on the plan the location of the input voltage cables in the house, mark the installation location of switches, sockets, connecting boxes, lamps and other electrical appliances. Schedule electrical wiring. Calculate and purchase the necessary materials.
Carry out marking work
You can mark the wiring lines using a special marking cord.It should be noted that the wires on the walls should be placed either vertically or horizontally. Moreover, the horizontal sections are recommended to be laid at a distance of 20 cm from the ceiling of the room. The angle of rotation of the wiring route should be strictly 90 degrees.
Mark on the walls of the installation site junction, installation and otvetvitelnyh boxes. It should be noted that according to the existing standards, sockets should be at a distance of 20-30 cm, and switches - 90 cm from the floor level.
Stitched the walls along the previously planned wiring route using a wall chaser. Prepare the grooves for installing the boxes.
Put the wires in the shafts done so that they do not protrude beyond the surface of the walls. Secure them with a solution of alabaster or special clamps. You should be aware that the attachment of electrical wires with nails is strictly prohibited.
Avoid crossing flat wires. If necessary, reinforce the intersection of several layers of insulation tape.
Install junction and junction boxes. Mount podozetniki.